Automatic searching and finding of installed GIS software binaries is done by the find functions. Depending on your operating system and the number of installed versions you will get a data frame with the binary and module folders.
# find all SAGA GIS installations at the default search location
require(link2GI)
saga <- link2GI::findSAGA()
saga
Same with GRASS and OTB
require(link2GI)
grass <- link2GI::findGRASS()
grass
otb <- link2GI::findOTB(searchLocation = "~/")
otb
The `find’ functions provide an overview of the installed software. These functions do not create links or change settings.
If you are just calling link2GI on the fly, i.e. for a single temporary operation, there is no need to set up folders and project structures. If you are working on a more complex project, it might be helpful to have a fixed structure. The same goes for existing GRASS projects that need to be in specific mapsets and locations.
A simple (you can call it dirty) approach is the initProj function, which creates folder structures (if not existing) and sets global variables (if desired) containing the paths as strings.
require(link2GI)
dirs = link2GI::createFolders(root_folder = tempdir(),
folders = c("data/",
"data/level0/",
"data/level1/",
"output/",
"run/",
"fun/")
)
dirs
In the past it was quite tedious to link the correct SAGA GIS version. Since version 1.x.x of RSAGA things are much better. The new RSAGA::rsaga.env() function is to get the first RSAGA version in the search path. It is also possible to pass the version number as shown below. Storing the result in appropriate variables will even allow you to easily switch between different SAGA GIS installations.
linkGRASS initializes the session environment and system paths for easy access to GRASS GIS 7.x./8.x. The correct setting of spatial and projection parameters is done automatically either by using an existing and valid raster or terra, sp or sf object or manually by providing a list of minimum required parameters. These properties are used to initialize either a temporary or a permanent rgrass environment, including the correct GRASS 7/8 database structure. If you do not specify any of the above, linkGRASS will create an EPSG:4326 worldwide site.
The most time consuming part on Windows systems is the search process. This can easily take 10 minutes or more. To speed up this process, you can also provide a correct parameter set. The best way to do this is to call findGRASS manually. Then call linkGRASS with the returned version arguments of your choice.
The linkGRASS function tries to find all valid GRASS GIS binaries by analyzing the GRASS GIS startup script files. After identifying the GRASS GIS binaries, all necessary system variables and settings are generated and passed to a temporary R environment.
If you have more than one valid installation and run linkGRASS with the arguments select_ver = TRUE, you will be asked to select one.
The most common use of GRASS is for a single call or algorithm. The user is not interested in setting all the parameters. linGRASS7(georeferenced-dataset)does an automatic search and finds all theGRASSbinaries using the georeferenced-dataset object for spatial referencing and other necessary settings. **NOTE:** This is the highly recommended linking procedure for all on-the-fly invocations ofGRASS. Please also note that if more than one GRASS` installation is found, the one with the highest version number is automatically selected.
Take a look at the following examples, which show a typical call for the well-known sp and sf vector data objects.
Starting with sp.
# get meuse data as sp object and link it temporary to GRASS
require(link2GI)
require(sf)
require(sp)
crs = 28992
# get data
data(meuse)
meuse_sf = st_as_sf(meuse, coords = c("x", "y"), crs = crs, agr = "constant")
# Automatic search and find of GRASS binaries
# using the meuse sp data object for spatial referencing
# This is the highly recommended linking procedure for on the fly jobs
# NOTE: if more than one GRASS installation is found the highest version will be selected
linkGRASS(meuse_sf,epsg = crs)
Now do the same with sf based data.
require(link2GI)
require(sf)
# get data
nc <- st_read(system.file("shape/nc.shp", package="sf"))
terra::crs(nc)
# Automatic search and find of GRASS binaries
# using the nc sf data object for spatial referencing
# This is the highly recommended linking procedure for on the fly jobs
# NOTE: if more than one GRASS installation is found the highest version will be selected
grass<-linkGRASS(nc,returnPaths = TRUE)
The second most common situation is to use an existing GRASS site and project, either with existing data sets or manually provided parameters.
library(link2GI)
require(sf)
# proj folders
root_folder<-tempdir()
paths<-link2GI::createFolders(root_folder = root_folder,
folders = c("project1/"))
# get data
nc <- st_read(system.file("shape/nc.shp", package="sf"))
# CREATE and link to a permanent GRASS folder at "root_folder", location named "project1"
linkGRASS(nc, gisdbase = root_folder, location = "project1")
# ONLY LINK to a permanent GRASS folder at "root_folder", location named "project1"
linkGRASS(gisdbase = root_folder, location = "project1", gisdbase_exist = TRUE )
# setting up GRASS manually with spatial parameters of the nc data
epsg = 28992
proj4_string <- sp::CRS(paste0("+init=epsg:",epsg))
linkGRASS(spatial_params = c(178605,329714,181390,333611,proj4_string@projargs),epsg=epsg)
# creating a GRASS gisdbase manually with spatial parameters of the nc data
# additionally using a peramanent directory "root_folder" and the location "nc_spatial_params "
epsg = 4267
proj4_string <- sp::CRS(paste0("+init=epsg:",epsg))@projargs
linkGRASS(gisdbase = root_folder,
location = "nc_spatial_params",
spatial_params = c(-84.32385, 33.88199,-75.45698,36.58965,proj4_string),epsg = epsg)
The full disk search can be tedious, especially on Windows it can easily take 10 minutes or more. So it is helpful to specify a search path to narrow down the search. To search for GRASS installations in the home directory, you can use the following command.
# Link the GRASS installation and define the search location
linkGRASS(nc, search_path = "~/")
If you already did a full search and kow your installation fo example using the command findGRASS you can use the result directly for linking.
findGRASS()
instDir version installation_type
1 /usr/lib/grass83 8.3.2 grass
# now linking it
linkGRASS(nc,c("/usr/lib/grass83","8.3.2","grass"),epsg = 4267)
# corresponding linkage running windows
linkGRASS(nc,c("C:/Program Files/GRASS GIS7.0.5","GRASS GIS 7.0.5","NSIS"))
Finally, some more specific examples related to interactive selection or OS-specific settings.
Manually select the GRASS installation and use the meuse sf object for spatial referencing. If you only have one installation it is directly selected.
linkGRASS(nc, ver_select = TRUE)
Create and link a permanent GRASS gisdbase (folder structure) in “~/temp3” with the default mapset “PERMANENT”” and the location “project1”. Use the sf object for all spatial attributes.
linkGRASS(x = nc,
gisdbase = "~/temp3",
location = "project1")
Link to the permanent GRASS gisdbase (folder structure) in “~/temp3” with the default mapset “PERMANENT” and the location named “project1”. Use the formerly referencend nc sf object parameter for all spatial attributes.
linkGRASS(gisdbase = "~/temp3", location = "project1",
gisdbase_exist = TRUE)
Setting up GRASS manually with spatial parameters of the meuse data
linkGRASS(spatial_params = c(178605,329714,181390,333611,
"+proj=sterea +lat_0=52.15616055555555
+lon_0=5.38763888888889 +k=0.9999079
+x_0=155000 +y_0=463000 +no_defs
+a=6377397.155 +rf=299.1528128
+towgs84=565.4171,50.3319,465.5524,
-0.398957,0.343988,-1.8774,4.0725
+to_meter=1"),epsg = 28992)
link2GI supports the use of the Orfeo Toolbox with a simple list-based wrapper function. Actually, two functions parse the module and function syntax dumps and generate a command list that can be easily modified with the necessary arguments. If you have installed it in a user home directory you need to adrees this:
Usually you have to get the module list first:
# link to the installed OTB Linux HOME directory
otblink<-link2GI::linkOTB(searchLocation = "~/apps/OTB-8.1.2-Linux64/")
# get the list of modules from the linked version
algo<-parseOTBAlgorithms(gili = otblink)
Based on the modules of the current version of `OTB’, you can then select the module(s) you want to use.
## for the example we use the edge detection,
algoKeyword <- "EdgeExtraction"
## extract the command list for the selected algorithm
cmd <- parseOTBFunction(algo = algoKeyword, gili = otblink)
## print the current command
print(cmd)
Admittedly, this is a very simple and preliminary approach. Nevertheless, it will give you a valid list of all OTB API calls that you can easily manipulate to suit your needs. The following working example will give you an idea of how to use it.
require(link2GI)
require(terra)
require(listviewer)
otblink <- link2GI::linkOTB(searchLocation = "~/apps/OTB-8.1.2-Linux64/")
root_folder<-tempdir()
fn <- system.file("ex/elev.tif", package = "terra")
## for the example we use the edge detection,
algoKeyword<- "EdgeExtraction"
## extract the command list for the selected algorithm
cmd<-parseOTBFunction(algo = algoKeyword, gili = otblink)
## define the mandatory arguments all other will be default
cmd$help = NULL
cmd$input_in <- fn
cmd$filter <- "touzi"
cmd$channel <- 1
cmd$out <- file.path(root_folder,paste0("out",cmd$filter,".tif"))
## run algorithm
retStack<-runOTB(cmd,gili = otblink)
## plot filter raster on the green channel
plot(retStack)
During the GEOSTAT 2018 (see https://opengeohub.org) in Prague some more complex use cases have been presented.
SAGA and OTB calls - SAGA & OTB basic usecaseGRASS based cost analysis on a huge cost raster - Beetle spread over high asia